Details
Parent Category: Special Safety Items
Category: Special Safety Items

 

Details
Parent Category: Special Safety Items
Category: Special Safety Items

Listing of Hardhats that can be worn backwards as allowed by ANSI/ISEA Z89.1-2009

Click Here

Details
Parent Category: Special Safety Items
Category: Special Safety Items

Arc Welding Safety Talk

OSHA's Welding Standards Subpart Q

Gas Welding Safety - Ohio Industrial Commission

Maintenance Welding Safety

Oxyacetylene Welding Safety - Kansas State University

Oxygen-fuel Gas Welding and Cutting

Oxygen-fuel Gas Welding and Cutting OSHA Standard 1910.253

Resistance Welding - OSHA Standard 1910.255

Torch Safety for roofers

Welding

Welding on Containers

Welding Fires

Welding Requirements - General OSHA Standard 1910.252

Welding Safety

Welding Safety on the Farm

Welding, Cutting, Brazing- OSHA's Technical Page

Welding, Cutting and Brazing Safety

Welding FACT Sheet from AFSCME

Welding and Burning Accident Facts from Department of Interior

Details
Parent Category: Special Safety Items
Category: Special Safety Items
I am not making any guarantees that this information is accurate.  YOU MUST verify; I am just passing along info from other network subscribers.

Bryan,

MSA allows their V Gard hats to be worn reversed as long as you reverse the suspension. See the attached Q&A document. The message is ready to be sent with the following file or link attachments: Shortcut to:

http://media.msanet.com/na/usa/headeyeface/vgardprotectivehelmets/vgardprotectivecapsandhats/0613_31faqs.pdf


(See attached file: MSA.hardhatTechInfo.pdf)(See attached file:hardhatmsa.pdf)

MSA has two documents...the one on right says UNIPRO suspension cannot be worn backwards, the one on the left says all but UNIPRO can be worn backward. I have not been able to find anything recent that retracts this...so assume these are still the only ones published by MSA.

Enforcement on such a thing is a nightmare. I gots too many peoples that know all these interpretations to just say DO IT! and only wear things forward. I get to let the plant safety team agonize on such things until they decide to clamp down. The path using them is a far better path but simple things like this become sticking points.
Bryan
Another Safety Helmet manufacturer that is in Australia constructs helmets from Kevlar and has various options to allow increased forward vision - and reduce the strain on the neck when looking in a above.
For our height workers we have implemented a version of the attached -- with a roof vent and extra holes for ventilation with ear muff clips. For remote areas or high temperature locations there is a cooling bladder that may be inserted in the crown of the helmet.

'

Bryan,
Here is the address for MSA hardhats FAQ which says that they are allowed to be worn backwards as long as you turn the suspension system around with the nape strap in the rear.
Bryan,

With regard to the question about wearing a hard hat backwards, SEI "Safety Equipment Institute . SEI is a private, non-profit organization established to administer non-governmental, third-party certification programs to test and certify a broad range of safety and protective products." has a list of hard hat they have tested at http://www.seinet.org/CPL/ansi89_1_2003.htm. This list includes hard hat models that are "also certified to ANSI Z89.1-2003 when worn with the peak toward the back of the head". This is not manufacturer certification and probably serves to further muck up the waters regarding the question about wearing the hard hat backwards.

Bryan,

Here is a list I received from a fellow attendee of an OSHA 503 class several years back.  It is dated 1997, but I would presume similar information is available in whatever the most recent release of the Z89.1 standard.

HEAD PROTECTION MODELS - ANSI Z89.1 (1997 Edition)

* Model is also certified to ANSI Z89.1-1997 when worn with the peak toward the back of the head.

Company Name

Brand Name

Model

Type/Class


3M Company

3M Hard Hat
3M Omega II*
3M Omega II Ratchet*
3M Full Brim Ratchet*


Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C


Aearo Company

Aearo
Aearo
Aearo

FB-10
FB-20
LR-46A

Type I/G,E&C
Type I/G,E&C
Type I/G,E&C


American Allsafe Company

Cyco Cap™ Ratchet*
Cyco Hat™ Ratchet
RAM Cap™*
RAM Cap™ Ratchet*
Sentry III™*
Sentry III™ Ratchet*





SN3
SN3

Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C


ASC / SC-6
SB-6 Cap


Type I/G,E&C
Type I/G,E&C


Erb Industries, Inc.
Erb Safety Division

Americana

Maverick* (production ceased)
Maverick II
Omega II Full Brim
Omega II Full Brim Ratchet

Omega II*
Omega IIR*


Type I/G,E&C

Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C

Type I/G,E&C
Type I/G,E&C


Fibre-Metal® Products Company, Inc.

Roughneck®
Roughneck®
Roughneck®
Roughneck®
Roughneck®
Roughneck®

P-2W*
P-2RW*
P-2SW*
P-2QW*
P-2QRW*
P-2QSW*

Type I/G&C
Type I/G&C
Type I/G&C
Type I/C
Type I/C
Type I/C


Superlectric®
Superlectric®
Superlectric®
Superlectric®
Superlectric®
Superlectric®
Superlectric®
Superlectric®
Superlectric®

E-1W*
E-1RW*
E-1SW*
E-2QW*
E-2QRW*
E-2QSW*
E-2W*
E-2RW*
E-2SW*

Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G&C
Type I/G&C
Type I/G&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C

Jackson Products, Inc.

ASC / SC-6
SB-6 Cap


Type I/G,E&C
Type I/G,E&C






Mine Safety Appliances Company

MSA Comfo Cap
Skullgard Cap*
Skullgard Miner's Cap
Skullgard Hat
Skullgard Miner's Hat

Thermalgard Cap*
Thermalgard Hat
Topgard Cap*
Topgard Hat


Type I/G&C
Type I/G&C
Type I/C
Type I/G&C
Type I/C

Type I/G&C
Type I/G&C
Type I/G,E&C
Type I/G,E&C


V-Gard Cap*


Advance V-Gard Cap*



10033991
10034018
10034036
10034027

Type I/G,E&C

Type I/C


Advance V-Gard Cap* (non-vented)

10034070
10034088
10034106
10034097

Type I/G


V-Gard Hat
V-Gard Hat w/UniPro Suspension


10017713

Type I/G,E&C
Type I/G,E&C


Vanguard Cap*
Vanguard II Cap


Type II/G,E&C
Type II/G,E&C


North Safety Products

Peak*
Peak*
Peak*
Peak*

A69R
A69
A79R
A79

Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C


Peak*

A59*

Type I/G,E&C


K2
Summit*

A29SPR
A99R

Type I/G,E&C
Type II/G,E&C


Vallen Safety Supply
Company

Valiant
Valiant
Valiant
Valiant

8700*
8700R*
9700
9700R

Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C


Western Hardhat , Inc.

Western Hardhat

15257
15259
15261
15263
15444

Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C
Type I/G,E&C

Hello Brian,

I truly enjoy your newsletters, keep up the great work!  With regards to hard hats with Brim backwards, I do believe (but you will have to confirm) that Fibremetal has certification for their hats to be worn brim backwards.

Best Regards from Sunny British Columbia, Canada

Details
Parent Category: Special Safety Items
Category: Special Safety Items


These are some of the items that attendees got on their CD.

Air Monitoring Equipment Explanations (.doc)

CSE Cheat Sheet (.doc)

PRCS Evaluation Checklist (.doc)

Misuse of Combustible Gas Meters (.pdf)

NIOSH Guide to Safety in CS's (.pdf)

NIOSH - Preventing Fatalities in Confined Spaces (.doc)

NIOSH Study - Workers Deaths in CS's (.pdf)

OSHA Hazard Information Bulletin - Misuse of meters (.doc)

Details
Parent Category: Special Safety Items
Category: Special Safety Items

SPECIAL Safety Items

Listing of Hardhats that can be worn backwards as allowed by ANSI/ISEA Z89.1-2009

Click Here

 

Workplace Eye Protection Page

Due to the many request to leave this material posted throughout the year, I have added it to the special safety info page.

Click Here


2007 FREE Confined Space Course Materials

Detailed Look at OSHAs and EPA Chemical Process Safety

A MUST READ for ALL personnel associated with PSM...

OSHA's Petroleum Refinery Process Safety Management National Emphasis Program. CPL 03-00-004, (2007, June 7).

VicRoads has been utilizing a worksite risk management 'tool kit' to assist when training its personnel in the use of the Road Management Act 2004 - WorkSite Safety - Traffic Management Code of Practice.
The tool kit is a compilation of many of the tables and checklists from the Code in a more printer friendly format.
It is now available for those managing and working on roadside worksites.

worksite risk management tool kit.pdf

Safety Soapbox Feature - SWAT Phase 2 Launch - 24-6-05.pdf

Work Zone Safety Efforts in AU

This is a speech given by a GREAT safety professional and friend of mine.

Dennis Collins, Asst. Area Director of the Cincinnati Office.

I think you will agree he hits the nail on the head!

I would like to take this opportunity to tell you that OSHA has the issue of worker safety and health well in hand

FALL PROTECTION GEAR RECALLS

&

Type 1 Abrasive Cut Off Wheels Recall

VPP Recommendations, Contingency Items, Merit/Conditional Goals from OSHA

CLICK HERE for a FREE Incident Report on Release of Stored Energy from a Pressure Washer

SAFETY ALERT!!!

Compressed gas cylinder tampering in Europe

EIGA Safety Notice PKG17.pdf

Disguised Cylinders.xls

Weed Trimmer Incident

Click Here

The Funeral

A Plant Manager's perspective on a workplace death at his facility.  A MUST READ for everyone!

CLICK HERE

Electrical Flashsuit Protection Info

Click Here

New Device on Dow Tank Cars

These are photos of a GPS device now placed on hazardous material rail tank cars for Dow Chemical. It is possible that some people will see them and call 911 to report them as improvised explosive devices (IEDs); because the tank cars do look "wired" and suspicious.

Click Here

SATURDAY WITH A GREAT START BUT A POOR FINISH

This is what being a safety professional is all about.  This is NOT a 9-5 profession and I must say i drive family members and friends crazy sometimes with all my worries and concerns about their actions or lack of actions; but I do sleep well at night, at least those that the phone does not ring at 3:00 a.m. with a safety question!

Click Here

Sledge Hammer Alert

Click Here (.doc)

Product Non-Conformance Notice - Spider Body Harness

Click Here (.pdf)

Alternative to Employee Couch Potatoes! - WorkPaceUSA

A GREAT idea as what to do with injured workers who are off work for periods of time!!!!

Many Thanks to Bill Klingbeil for bringing this to our attention.

Click Here

Facial Hair Survey

Ever wondered how other plants manage this very sensitive issue.

Here is a look inside what one VPP Region found how their plants deal with this.

Click Here

Why the PRO's wear their PPE!

Click Here (.doc)

A material handling BEST PRACTICE from WorkSafe Victoria (a "Partner in Safety")

Click Here (.pdf)

Keena Fencing and WorkSafe Victoria teamed up to design a win-win for everyone involved and greatly reduced the chnaces for an injury while handling concrete blocks.

Safety Program Report Card

Click Here (.pdf)

NEVER drive thru flood waters!

Click Here

A Construction Safety Bedtime Story

Click Here (.pdf)

Another GREAT piece from our friends at WORKSAFE VICTORIA!

Seatbelts - A law you can live with

Click here (.pdf)

An MSHA Bulletin

Welding Safety Bulletin

Click Here

PPE Issues

Click Here

OSHA's Heat Stress Card in Adobe pdf.  No there's no excuse for not having this in every front-line supervisors and safety professionals hands!!!

Click Here

Hot Work Safety

SPECIAL SAFETY WARNING on Razor Blades and Tank Trucks & Rail Cars

Many thanks to Bill Klingbeil, the Laporte, TX LEPC and EQUISTAR Chemicals LPO for sharing this info.

Click Here

Awesome shots of what it's like being on an Oil Rig during a Tropical Storm

Many thanks to our "Partner in Safety", Bruce Dial for these great shots.

Click Here

FEMA/USFA ANNOUNCES NEW PROGRAM TO PREVENT HOME INJURY AND DEATH

 

CLICK HERE

VPP Region VI Summary of Findings

CLICK HERE

I Love you Dad. Please don't get hurt

This may be the shortest most straight forward safety message of all!  All I can say to it is AMEN and if you thought I was a fanatic about safety when I was single you can not imagine the extremes I go to know that I am a dad!  Many thanks to Gregg Munger with PB Drilling for putting this together and to Ken Houston @ Key Energy Services for sharing.

CLICK HERE

A SPECIAL Saint Patrick's Day Safety Message

CLICK HERE

Provided by Bruce Lamach w/ Kajima Construction Services Inc.

SAFE Pallet Racking

The BEST guide I have come across!

CLICK HERE

GUIDELINES FOR INDUSTRIAL STEEL STORAGE RACKS

CLICK HERE

Thoughts of an Emergency Responder

Click Here

Safety is ALL about Attitude!

Click here to see why!

Thinking of renting some equipment?  Here's a GREAT Checklist to use when considering the safety of the equipment.

from WORKSAFE Victoria

CLICK HERE (.pdf)

A very SPECIAL SAFETY MESSAGE

Click Here

Definition of a Safety Professional?

 
View 's profile on LinkedIn

 

 LinkedIn Group Button

facebookIcon

 

Partner Organizations

 Chlroine Institute Logo 100 years

I am proud to announce that

The Chlorine Institute and SAFTENG

have extended our"Partners in Safety" agreement

for another year (2024)

CI Members, send me an e-mail

to request your FREE SAFTENG membership

 

RCECHILL BW

  

kemkey logo

OHS Solutions logoCEMANE power association logo

 EIT LOGO

 

Member Associations

ASME logo

 

Screen Shot 2018 05 28 at 10.25.35 PM

aiche logo cmyk highres

Chlorine institute

 nfpa logo.5942a119dcb25

 

TOCAS

 

BLR Logo 2018

 

 

 

 

safteng man copy

 

 organdonor